Home > Climbing

Rope Solo Rock Climbing: Understanding How It’s Done

The author on the headwall of The Shield on El Capitan, Yosemite(Photo/Christian Black)
Support us! GearJunkie may earn a small commission from affiliate links in this article. Learn More

With the recent influx of climbing media such as ‘Free Solo,’ ‘Dawn Wall,’ and ‘The Alpinist,’ climbing jargon is spilling out into the general public. And the most common buzzword among climbing media is cause for some due confusion: soloing. We explain the rope solo here.

Climbers divide soloing into two main categories: free solo and rope solo. Like the movie suggests, free solo involves climbing alone without any rope for protection in case of a fall. On the other hand, rope solo refers to climbing alone but with a self-belay rope system to protect against a fall.

Regardless of whether the rope soloist is “free rope soloing,” using only hands and feet for upward progress, or “aid rope soloing,” using mechanical aids for upward progress, the basic self-belay system remains the same.

Between being a Climbing Ranger for Yosemite National Park and the skills learned from two seasons of work on Yosemite’s Search and Rescue team, I’ve continually honed my rope systems and efficiency, all of which have paid dividends to my climbing goals.

My time in Yosemite has given me experience on over 10 different big wall routes in Yosemite and nine ascents of El Cap. My climbing travels have taken me from sport climbing in Mexico and China to the summit of Fitz Roy in Patagonia.

So, let me explain how lead climbing a pitch and simultaneously belaying yourself works.


Editor’s Note: Rock climbing is an inherently dangerous activity. As with any outdoor sport that entails risk, you should start slow and at a level suitable to your experience. Above all, you should go with someone more experienced than you for your own safety. We do not encourage rope soloing for anyone who is not an experienced, highly skilled climber with full knowledge of safety techniques and equipment. Even so, equipment manufacturers often do not recommend their gear for rope soloing.


Rope Soloing: A Basic Understanding

Climbers can break down the basic process of rope soloing a route into three main phases: leading the pitch, rappelling the pitch, and reascending the pitch to clean the gear used for protection during the ascent. We’ll break down each step below.

Leading the Pitch

Similar to regular multipitch rock climbing, the first step involves building an anchor at the bottom of the pitch. However, because there is no other person to belay, the anchor is made to take an upward pull. So, one end of the lead rope is fixed to this anchor and the climber ties into the other end of the rope.

Next, the climber uses a self-belay system to feed themselves slack as they climb farther away from the anchor. Unlike a standard belaying scenario, the rope goes directly from the anchor through the self-belay device of choice on the climber’s belay loop. Then, the rest of the slack rope rests on the other side of the self-belay device, with the climber.

Instead of loading the rope’s end, the self-belay device catches the fall. The climber is tied into the lead end of the rope, but it isn’t a load-bearing attachment point while ascending. In this way, a rope solo climb is the opposite of a partner-belayed climb.

The self-belay device on the climber arrests the falls, not by one at the ground or anchor. And the rope slack is with the climber, not the belayer.

Should You Use Assisted-Braking Belay Devices?

lead rope solo set up
The two carabiners on the left indicate the ground anchor or the lower multipitch anchor; (photo/Brent Barghahn)

There are specialized self-belay devices explicitly built for this purpose. Still, many rope-soloists also use assisted-braking belay devices, often in a modified configuration that the manufacturer does not recommend.

When using assisted-braking belay devices for a rope solo, there is always the added risk that the device could jam, fail to lock correctly, or cross-load the carabiner, as it’s not always in the proper orientation.

To mitigate the risk associated with the assisted-braking device failing, most rope soloists opt to use an additional system of multiple backup knots secured to a structural part of their harness. Each backup knot holds a loop of slack that bears the rope’s weight off of the assisted-braking device. This loop of slack doubles as a secondary attachment if the primary assisted-braking device fails.

As the climber continues to feed out slack as they ascend, backup knots are untied from the harness to allow the next slack loop to feed out. It’s important to note that even though backup knots add security, there is still the risk of a long fall if the assisted-braking device fails to engage.

In that case, slack would feed through the whole system until a backup knot engages. This scenario could be very dangerous over ledges or close to the ground.

Rope solo gear list:

  • Skinny 9.0-9.2mm climbing rope
  • Assisted braking belay device
  • Anti-cross loading belay device carabiner
  • 4-6 nonlocking smooth-nosed carabiners
  • 2 larger, stronger locking carabiners
  • 1 small locking carabiner
  • 1 neck bungee, made with elastic camping shock-cord

Rappelling the Pitch

rope solo rappel set up
The arrows indicate the top of the pitch; (photo/Christian Black)

Once the climber reaches the top of the pitch, the next step is to fix the rope and rappel the pitch to untie the bottom anchor. While the climber will clean some gear on the way down, they will often leave some as directionals for reascending the pitch.

Reascending the Pitch

rope solo jugging set up
Arrows indicate the top of the pitch; (photo/Christian Black)

Once the climber cleans the bottom anchor, they reascend the pitch, usually using mechanical ascenders and webbing ladders the same way one would follow a pitch of big wall climbing.

As the climber ascends the rope, they clean the rest of the hardware placed until they are back at the upper anchor with all the gear. The climber repeats the entire process for the next pitch.

Pitch reascending gear list:

  • 1 progress capture device, Petzl Microtraxion or Edelrid Spoc
  • 2 ascenders
  • 2 daisy chains
  • 1 progress capture device
  • 1-foot loop for jugging

Top-Rope Soloing

top rope solo set up
Arrows indicate anchors at the top of the pitch; (photo/Christian Black)

Alternatively, if the climber wants to climb the pitch again to practice moves or work out sequences, they can use a top-rope solo. Climbers can also do single-pitch top-rope solos if the top of the route is accessible and they can build an anchor.

There are many ways to set up a top-rope solo, with all sound systems having an element of redundancy built-in — if an attachment to the rope fails, a second point secures the climber.

The most common system consists of two progress capture devices that slide up the rope as the climber climbs. Again, using devices in this way is inherently more risky than partner-belayed climbing and is not recommended by the manufacturers.

Top rope solo gear list:

  • 2 progress capture devices
  • 1 neck bungee, made with elastic camping shock-cord

Additional Hauling Steps for Multiday Climbs

If the climber spends more than a single day on the wall (which is typical for this type of climbing), they will have to haul up bivy gear.

Some additional steps are involved, such as setting up the haul system at the top of the pitch, undocking the haul bags after rappelling the pitch, and hauling the haul bags after reascending the pitch.

The involved, complicated nature of rope solo climbing draws a particular type of climber, one who is in it for their own experience and enjoys taking on the added responsibility. While certainly not for everyone, rope solo climbing can be a unique way to experience rock climbing for those up to the challenge.

Subscribe Now

Get adventure news and gear reviews in your inbox!

Join Our GearJunkie Newsletter

Get adventure news and gear reviews in your inbox!