Perhaps the most significant differentiator is the three-class e-bike system.
That’s Class 1, Class 2, and Class 3.
If you’ve ever shopped for an e-bike, you’re almost certain to have come across one or more designations. But what exactly do they mean? And where did they come from?
Let’s start with how the U.S. law has defined an e-bike, or more precisely, a “low-speed electric bicycle.”
E-Bike Classes: Legislation and Regulation
Passed by Congress in 2002, H.R. 727 establishes that a low-speed electric bicycle is “a two- or three-wheeled vehicle with fully operable pedals.” It has an electric motor with up to 750 W of power output (1 horsepower) and a maximum motor-propelled speed of 20 mph.
The law separates those bicycles from motorized vehicles, placing them under the purview of the U.S. Consumer Product Safety Commission, which regulates bicycles. The National Highway Transportation Safety Administration regulates automobiles, motorcycles (including electrics), and other high-speed vehicles.

However, so-called “e-bikes” within and outside H.R. 727’s parameters were — and continue to be — sold worldwide and end up rolling on roads and bike paths throughout the states. So the U.S. bicycle industry took it upon itself to help bring more order to the emerging e-bike market and help individual states. Each state holds authority over bicycle usage on public roads and bike paths and identifies where e-bikes might safely be ridden.
Industry groups like the Bicycle Product Suppliers Association (BPSA) and PeopleForBikes (PFB) worked together to create the three-class system. (Side note: The BPSA and PFB later merged under the PeopleForBikes name to more effectively coordinate on e-bike policy.)
The first beachhead in the campaign, literally and figuratively, was cycling-rich California. In 2015, the Golden State was the first to pass what PeopleForBikes now calls the “Model Electric Bicycle Law With Classes.”
The 3 E-Bike Classes
Class 1
A bicycle with a motor that provides assistance only when the rider is pedaling. It ceases to assist when the bike reaches the speed of 20 mph.
Class 2
A bicycle with a motor that exclusively (typically via a twist throttle or thumb lever) propels the bike. It is incapable of assisting when the bicycle reaches the speed of 20 mph.
Class 3
A bicycle with a motor that provides assistance only when the rider is pedaling. But it ceases to assist when the bike reaches the speed of 28 mph and is equipped with a speedometer.
Power output for all three classes is limited to 750 W/1 horsepower, as outlined in H.R. 727. Class 3 bikes exceed the federal law’s 20mph power-assisted speed limit. But the category is in alignment with the European designation for “speed pedelecs.” This includes e-bikes providing assistance only when the rider is pedaling, with the motor putting out at no more than 45 kph, equaling 28 mph.

‘Reasonable Access’ for E-Bikes
