Support us! GearJunkie may earn a small commission from affiliate links in this article. Learn More

Splitboarding flips the resort experience on its head: Rather than riding chairlifts, you climb uphill then descend untouched backcountry terrain. It’s equal parts challenge and reward. Choosing the right splitboard makes all the difference between a slog and a smooth, unforgettable tour.

It’s important to choose a splitboard that fits your expectations. Splitboard technology has come a long way from the days of running your old board across a table saw.

There’s no shortage of designs. You can go for a dependable all-arounder like the Jones Men’s Solution Splitboard. If you have big feet and wear big snowboard boots, you might prefer the volume-shifted, wide K2 Isolator Unisex Splitboard. There are also traditional, full camber designs including the Arbor Veda.

Editor’s Note: We updated this guide on October 20, 2025, with a field-tested review of Korua Transition Finder Split.

The Best Splitboards of 2025-2026


Specifications

Setback
1.9 cm
Taper
5 mm
Flex
7
Sizes
157, 160, 164W
Profile
Camber past the feet, more rocker in the nose than tail

Pros & Cons

Pros

  • Great edge hold
  • Durable materials

Cons

  • Lacks a playful feel
  • Slightly heavy
Morgan Tilton

Never Summer’s recent return to the world of full camber profiles is welcomed and much needed. The brand’s long stint strictly making boards as rocker/camber hybrids led to its all-mountain boards being good, not great. After a season of testing, we found the Never Summer Proto Splitboard ($1,120) is awesome!

The Proto was the board we wanted to take out every day. It has a fun, playful feel while still being sturdy and reliable across all conditions. The directional shape helps it effortlessly float through powder, and it can seamlessly transition to firm icy slopes where it reliably holds an edge, giving us the confidence to get down anything. 

This combination of wood and bamboo in the core keeps the board snappy without creating an overly damp feel. Above and below the core materials Never Summer lays up carbon in an X shape between the feet and a V shape outside the feet. This carbon layout improves torsional flex, creating a reliable feel when on edge without making the board overly stiff from tip to tail.

The Proto received a seven on our flex scale compared to a manufacturer-assigned eight. We might have given it an eight too, but on paper that felt too close the Weston Ridgeline Carbon considering on snow there was a more noticeable difference. 

While our crew liked the Proto Splitboard, we would still place it in a more aggressive category. The board is easier to float through low-angle powder than, say, the Weston Ridgeline Splitboard, but it still prefers to be ridden fast and prefers steep slopes. It is certainly not the most playful board in this group, but makes a great option for advanced riders who need performance in demanding terrain but also mix in a few mellow powder days.

Best Overall Splitboard for Women

Jones Women’s Solution

Specifications

Setback
2 cm
Taper
12.5 mm
Flex
7
Sizes
146, 149, 152, 155
Shape
Directional
Profile
Directional rocker in the nose, camber underfoot, rockered tail

Pros & Cons

Pros

  • All-mountain aggressive ripper
  • Flirty spoon nose
  • Recycled interior and exterior edges and ABS sidewalls
  • Tenacious, enduring construction that lasts season after season

Cons

  • Edges ice at an 8/10 level, so remain vigilant on stiff, steep entrances
  • Stiffer but not the rigidest option on our list
Morgan Tilton

Read Review: Jones Women’s Solution Splitboard Review: Powerhouse for Big Terrain and Missions, Season After Season

We’ve been fans of the all-terrain Jones Women’s Solution ($1,050) for many seasons, and it hasn’t steered us wrong. Nor has this exploration tool shown much depreciation despite being our number one backcountry partner. Whether we’re creating tight lines through the aspens and evergreens, painting slopes, gassing down an open face, traversing an iron slope, or dropping into a 45-degree plus line, the Solution has been staunch and trusty.    

The spooned nose is clutch. Inspired by surfboards, Jeremy Jones imagined that splitboards would benefit from a subtle curve along the base: think of a spoon with a curve in all directions versus the nose-to-tail upturn like a banana. Called the 3D Contour Base, the design makes transitioning into turns more nimble with less resistance and increased glide. We concur — and shredding with a spooned nose is one helluva good time. Goodbye, punchy nose dives. Hello, freedom. 

Shape, flex pattern, and profile are all directional with a hybrid camber-rocker profile. Meaning, camber is located between and beneath the feet, a mild rocker is at the tail, and stronger rocker is at the tip. The Traction Tech 3.0 edges add a wavy silhouette with three bumps along the edges — and the center bump is larger than the other two — increasing the contact points for gripping snow, which is incorporated on both the interior and exterior edges for climbing or descending.

The 3.0 version of Traction Tech adds more aggressive bumps under each binding and a larger centered bump in the sidecut. The core is made with high-quality paulownia and minimal poplar stringers for power and longevity. 

We pulled on the all-seasons Jones Pre-cut Nomad PRO Splitboard Skins ($300) for uphill walks with an effective, strong glue that’s not sticky or thick. Overall, this skin design is among the thinnest, lightest-weight, and most streamlined while remaining effective. The nose’s metal clip was easy to pull onto each split ski and the tail clips fluidly popped into place. We didn’t have any issues with the tail clip coming off or snow getting sandwiched despite encountering steep, deep sandbox snow conditions at times. We appreciate the packability and the plush — 70% mohair, 30% synthetic — is surprisingly soft to the hand. These puppies are also PFC-free and have a Bluesign-approved anti-glopping treatment.  

Nerve-wracking and meditation-jolting are two descriptors for dropping into a line and seeing the tip clip pop open. This was the only women’s splitboard we tested with the Karakoram Tip-Lock tip clips, which include a streamlined lock that swivels shut for added security.

The additional micro-step when putting the split skis together or taking them apart took getting used to but overall, we appreciate the safety checkpoint. The Karakoram Ultra Clips 2.0, of which there are two sets that reconnect the interior edges of the splitboard, are smaller and lightweight compared to the original Ultra Clip design. With an adaptive personality, durability, edge bite, and all-around balance, the Women’s Solution will be joining us on many missions to come.

Specifications

Setback
2 cm
Taper
9 mm
Flex
8
Sizes
158, 161, 162W, 166, 166W
Profile
Directional freeride, camber past the feet, rocker tip and tail

Pros & Cons

Pros

  • Confidence inspiring and surfy feel
  • Playful

Cons

  • Skins failed relatively fast
  • Hard to put together when snow-packed
Morgan Tilton

When we first heard of Stranda and the Stranda Descender B.C. Splitboard ($895), we had no idea what to expect from the Swedish company. Did they even have splitboarders over there? The answer is yes — not only do they have great terrain, powder, and splitboarders, but they are great board shapers as well. The second we strapped into the Descender at the top of a line on a mid-winter pow day, we were hooked. 

The Descender is a directional freeride, semi-stiff, slightly surf-inspired splitboard that holds speed and gives confidence like no other. Designed for speed, float, and glide in powder while also providing grip when things get icy and a core that dampens all sorts of chunder there’s a lot to love.

Going back to our first run on the Descender we were blown away by how fast this board attacks deep powder while remaining light enough underfoot to stay super playful. We found ourselves trying butter 3’s, switch landings, and hucking ourselves off every pillow we could find. 

We loved the Stranda Power Bumps: wavy edges at the inserts that provide excellent traction on steep and icy slopes. Integrated tail clips helped keep the skins on during the uphill. 

The Phantom Hercules Hooks got the job done but were harder to get together when packed with snow compared to the Karakorum Ultraclips. While we loved the performance of the Descender, there was a lot less to love about the supplied Stranda Climbing Skins which stopped sticking to our board after a few tours. 

Overall, this surf-inspired directional freeride board was one we kept coming back to from the plethora of boards we tested. The Descender B.C. Splitboard is a solid choice for pow or variable snow and a range of terrain or objectives.

Best Budget Splitboard for Women

Arbor Veda Camber Splitboard

Specifications

Setback
2 cm
Taper
8.3 mm
Flex
6
Sizes
152, 156, 159, 162W
Shape
Directional
Profile
Camber that’s gradually reduced towards the tip and tail

Pros & Cons

Pros

  • 1.5-degree tapered corners help prevent snags and improve turn initiation
  • Athletic board for variable conditions in the high alpine
  • Gorgeous aesthetic

Cons

  • If you prefer a true twin, this board is directional and setback
  • Isn’t tailored to novice riders
Morgan Tilton

Designed by legendary snowboarder Marie-France Roy for advancing, aggressive riders, the Veda is an exploratory maven. This cambered directional ride handles everything like a champ. From variable, firm coverage at the tops of peaks to pillowy snow in the pines and springtime mashed potatoes at lower elevations, the Arbor Veda Splitboard ($780) had our back. As of 2024-2025, the size run was narrowed down to 152 and 156. 

A slight setback stance and longer nose lends itself well to deep days, but don’t compromise what inevitably is the majority of our hours on a splitboard. And we never felt the board give up power in technical terrain. The 27.8 cm length and 28.7 cm width in the front paired with the 19.3cm length and 27.8cm width in the back is a great blend.

Slightly stiffer with a sintered base, the board didn’t back down to chunder and saved our legs from feedback. On ascents, edging across steep terrain was confidence-inspiring — the board was hearty. This design also felt easy to navigate edge to edge through tight forests despite snow variability swinging from soft to heavy in the spring.

That Parabolic Camber means the profile’s traditional downturned curve is reduced toward the board’s ends, offering a responsive and relatively poppy feel. Along each edge is Grip Tech, which offers four contact points for the snow where the board bulges, like an ocean wave, for an improved grip: Two are in line with the bindings, and another two toward the tip and tail.

And the four corners of the board also feature 1.5-degree upward tapering, called fenders, to pull the edges off the snow for more seamless transitions and a less hooky feel, which brought ease in tough conditions. We never got bucked. No chatter. No bounce-back. No grabbiness. With a medium sidecut radius at 8.65 m — not too deep or shallow — the board is fairly fun to rip around whether we’re making tighter or drawn-out turns. 

Topped off with the model-specific SplitGrip Climbing Skins ($230), which are made by Arbor and Kohla, the snow grip worked splendidly. The glue bond and tail clips showed no drawbacks. Sliding over the snow, that mohair/nylon hair excelled on steep and slick uphills, and we noticed no unusual back-slides.

The wide metal clip slides quickly onto the corner of the split ski’s nose while the sturdy butterfly clip takes a pull to get over the tail but doesn’t budge. The adhesion was super strong — we typically needed a knee to divide a skin that’d been folded together in our pack — and clean. 

We loved pulling this splitboard out for select tours. With that gorgeous dark wood and emerald-colored inlay, the creative design is easy on the eyes. For those that glorify directional camber, the Veda Splitboard isn’t too stiff, too poppy, or too flexible — it’s just right. The board is offered as a solid for resort days, as well. 

Best Splitboard for Beginners

Capita Navigator Splitboard

Specifications

Setback
2.5 cm
Taper
11.8 mm
Flex
4
Sizes
147, 151, 155, 158, 161, 164
Profile
Camber past the feet, rocker tip and tail

Pros & Cons

Pros

  • Playful
  • Easy to float

Cons

  • May be too soft for some
  • Lacks edge control in firm snow
  • Not a durable top sheet
Morgan Tilton

Recently launched and unchanged for this winter, the much-loved powder-slaying Capita Navigator is now available as a splitboard. This highly anticipated release will assist you in getting untouched turns all day long, or at least as long as your legs last. The Capita Navigator Splitboard ($1,000) is a soft and playful splitboard that effortlessly floats through low-angle powder and easily navigates tight, gladed terrain.

The playful nature of this board is what earned it a title. This was the go-to board for enjoying low-angle pow and tight trees on those deep snow and high avalanche danger days. Couple the soft, easy-riding nature of this board with the huge range of sizes, and this makes for the most accessible and best entry-level splitboard of the group. The Navigator presents a fun, playful ride, which is refreshing among a sea of more aggressive leaning boards.

Did we mention that this board is soft? It was difficult to compare it with many of the boards in our test, which is why we dropped our rating down to a four as compared to the manufacturer-assigned six.  More aggressive riders may find this board won’t provide enough support in more technical terrain. The soft flex also allows for a lot of vibrations to be felt by the rider’s feet. When you take this board out of the powder and into a firmer snowpack, you feel every bump, and it becomes difficult to hold an edge, especially at higher speeds.

This design is also a great option for more playful riders who are used to riding a soft or rockered board as their daily driver at the resort. Another positive note to mention about all of the snowboards made by Capita is the eco-friendly “Magic Bean Resin” they use in the production of their top sheets. Magic Bean Resin is a plant-based product with a bio content of 60% renewable, agricultural raw material. It is produced with no greenhouse gas emissions and requires less heat than typical top sheet materials, lowering the energy needed during the production process of the boards.

After solid rounds, the Navigator Splitboard makes a great option for more relaxed riders. The directional shape, coupled with Capita’s “flat kick” tip technology, allows effortless float in powder, while the parabolic side cut creates a tighter turning radius for snappy turns through the tightest tree runs.

Specifications

Setback
1.9 cm
Taper
2 mm
Flex
8
Sizes
154, 158
Profile
Volume shifted, directional

Pros & Cons

Pros

  • Volume shift lets you ride a shorter board than normal
  • Floats very well in powder

Cons

  • Does not perform across all conditions
  • Too wide for most skin tracks
Morgan Tilton

Don’t change a good thing if it nails the fit. Launched two seasons ago and unchanged, the K2 Isolator Unisex Splitboard ($1,050) volume-shifted splitboard is a powder lover’s dream. The Isolator is a split version of K2’s bestselling hardboard, the Excavator, which is a unisex and volume-shifted design. What is volume shift, you might ask? The design redistributes the surface area of the snowboard from the tip and tail to the waist, which reduces heel/toe drag and also swing weight. Volume shift boards are shorter and wider than traditional boards meaning riders can downsize 4 -10 cm from the usual length. 

In a word, this board is wide. Coming from our tester who uses a size 11 splitboard boot, the 158 model features a 26.8 waist width, meaning large-boot riders can ride a neutral stance without heel or toe drag or being forced into a duck foot or positive camber stance. On top of the stance options, the Isolator delivers an unmatched surfing experience when things get deep.

From Colorado’s champagne powder to the PNW concrete this board has no issues with float, displacing powder better than any board we tested. But when things dry up and the storm cycle stops the board does not handle icey, crusty, windboarded hills as well as it performs in the fluffy stuff. When things get slushy in the spring the wide Isolator trenches turns and floats atop the mashed potatoes. 

While a directional board, the Isolator features a dual radius sidecut (as in, the same radius sidecut edge to edge), which K2 promotes as a unisex design. The board also features a paulownia wood lightweight and flexible core and tip-to-tail carbon fiber stringers, which keep the board poppy and playful in the turns. Karakoram UltraClips hold the tip and tail together for a split that feels like a solid. Splitpack inserts or narrow channels that take the place of standard binding screw inserts offer more versatility for stance widths and binding placements.

The Isolator Unisex Splitboard was also the only board to come with pucks from the factory.  A “SnoPhobic” topsheet helps eliminate snow building up on the topsheet (which we found to be true). We found the extra width in the tip and tail meant the splitboard didn’t fit in a normal skin track, and even if we were in the back of the group, we were still somewhat breaking trail on both sides.

For those facing drag — bigger-footed riders searching for a more width — this board is a tool for the box. The Isolator is also for the powder chaser who wants unmatched float in a smaller package. This was as close to a surfboard for the powder as we could find. 

Specifications

Setback
2 cm
Taper
9 mm
Flex
8
Sizes
158, 161, 162W, 166, 166W
Profile
Directional freeride

Pros & Cons

Pros

  • Lightweight
  • Playful

Cons

  • Pricey
  • Gives up a bit of durability
Morgan Tilton

Are you someone who counts grams? Do your friends call you a weight weenie? Then the Stranda Descender Fjäderlätt Splitboard ($1,245) might be the perfect bestie for you. Fjäderlätt translates to “featherlight” in Swedish and is Stranda’s take on an extremely lightweight, high performance splitboard. 

Shaving grams, the Fjäderlätt 161 comes in at just 2,790 g or 6.1 pounds compared to the Descender 161 at 3,100 g or 6.8 pounds. The splitboard starts with a paulownia wood core, reinforced with ash inserts and aluminum stringers to maintain rigidity. Then the entire board is wrapped in a full carbon fiber triax weave resulting in a lighter weight, more durable, and stiffer splitboard designed for high alpine missions compared to the normal Desender.

The Fjäderlätt has the same set of features and shape as the Descender that we love. The board retains its playful, surfy, and confidence-inspiring feel in the powder but really excels when things get steep, and the board needs to go on your back to reach the summit. Whenever we were planning a high alpine mission we reached for the Fjäderlätt over the OG Descender for the noticeable weight savings.

We could feel the lighter weight on the skin track, the bootpack, and the descent. The added stiffness helped the lighter board still feel supportive underfoot while remaining very playful and agile. 

Designed for athletes consistently on the bootpack and in alpine missions, where every gram counts, the Descender Fjäderlätt Splitboard is for riders looking for every last drop of performance from their gear. Is the full carbon board worth the extra $350? After a long day in the alpine our shoulders and legs said yes. 

Our Other Choice Splitboards for Backcountry Adventures

Specifications

Setback
2 cm
Taper
9 mm (size 152)
Flex
8
Sizes
148, 152
Shape
Directional
Profile
Low camber with minor rocker in the tip and tail 

Pros & Cons

Pros

  • Playful
  • Stable in landings and high speed
  • Excellent edging and traversing power

Cons

  • Not the number-one choice for riding switch 
  • A beginner might consider a softer board 
  • Only two length options
Morgan Tilton

This splitboard acts as awesome as its solid counterpart, a difficult achievement to reach in the land of cut-in-half boards. The Stranda Women’s Descender Splitboard ($895) drives like a steady steed. This all-mountain board plows through crust yet is easy to guide, disperses snow upon smack landings off pillow drops, and is playful yet strong. 

The women’s iteration, first launched in 21/22, has a tad softer flex than the men’s version, and is the brand’s top-selling model — we’re not surprised. With head-to-tail widths of 28.4, 24.8, and 27.5 cm on the 152 length, and one of the largest tapers of splitboards on our list, this design feels stout underfoot but is also a joy to quickly zip back and forth through tight glades.

The gentle protrusion of the edges outside the inserts, dubbed Power Bumps, strengthens the edging power of the board, which was noticeable — especially while traversing steep hardpack faces. Safety: Check. 

A bit of rocker in the tip and tail aid lift. That’s blended with a “low” camber — the board is elevated 4 mm — which extends further behind the back foot, resulting in a lift beneath the rear binding, poppiness, and driving power. Mixed into the paulownia timber core are full-length poplar and ash wood inserts, triax glass with carbon stringers, and PU sidewalls with rubber strips along the edges for dampening — all of which lower the weight while reducing chatter.  

Partnered with Kohla, the brand offers a basic climbing skin in the pre-cut Stranda Climbing Skins ($248), which we found excelled across various snow and skin track conditions and ambient temps. A durable metal clip slides onto the nose of your split skis. At the tail, a metal clip with a sharp hook attaches to the edge via a small divot, with the design meant to save weight.

Though, the attachment is not our favorite to use because the narrow piece of metal needs to latch just right and is needle-pointed. The glue never glopped, nor was it too sticky, but some testers did experience a skin peel-off a couple of times — as the adhesion isn’t the hardiest. However, the glide and grip of the mixed mohair blend worked well across the season. 

Whether you’re plowing through deep powder at the top, managing sluff, or taking super steep drops, this board comes through. The directional silhouette has a way of dispersing whatever conditions it flows through — pushing through chunder and traveling well without requiring an exorbitant amount of effort to turn. Where this board shape doesn’t take an award is switch riding, but it’ll do that, too, when needed. Hands down, the Women’s Descender Splitboard is among our favorite all-mountain splitboards to date.

Specifications

Setback
2 cm
Taper
13.6 mm
Flex
8
Sizes
154, 158, 159W, 161, 162W, 164, 165W, 167, 169W
Profile
Directional rocker, camber between the feet, more rocker in the nose than tail

Pros & Cons

Pros

  • Single quiver design
  • Performs across conditions

Cons

  • Less playful
  • Not as surfy as other boards
Morgan Tilton

Jones has been making splitboards for a very long time. One could call the Jones Men’s Solution Splitboard ($1,050) the flagship splitboard of the board company.  Backed by and named after founder Jeremy Jones, the brand has spent years in the R&D department working on one board to rule them all, hence the name Solution. 

The pioneer brand describes the Solution as “the ultimate all-terrain split and offers unrivaled backcountry performance in any snow condition,” and we found it to be just that: one splitboard that can do it all well. We could call this board a ‘jack of all trades’ for backcountry conditions.

We had the board in deep powder, crust, windboard, death ice, and spring slush, and every time, the board felt stable and comfortable in these conditions. We didn’t have to think too hard about our movements; the board was naturally comfortable across the backcountry. 

While this board can handle all varieties of conditions in the backcountry, we found it to be a master of none of them. If we had to ride one splitboard for the rest of our lives, this would be a great choice — the design gets an 8/10 in everything but a 10/10 in none — but at the end of the day, the board lacks freeride soul.

It’s hard to put into words “The Feeling” one gets when making a turn in the backcountry. We wouldn’t primarily describe this board as having a playful edge, or that surf-like feeling. This is not to say we had a bad time with the Solution; it just feels more like a precision tool than a soul stick. 

This splitter is packed with attention to detail including a sintered base and bottomless bridge — meaning, the eight bolts that hold the clips do not go through to the base but are instead raised on a visible ‘bridge’ in the center of the board — both of which help this board reach high speeds on the descent.

We are big fans of the integrated tail clips when used in combination with Jones climbing skins and the Traction Tech Edge 3.0 — the unique wavy center edge that provides great grip on steep and icy skin tracks. Jones has been at the forefront of sustainability when it comes to building splitboards, and the Solution is no different.

Starting with a sustainably harvested wood core and top sheet, recycled sidewalls and edges, held together with a bio-based resin and built in a factory powered by solar power, you feel good about where this board comes from. At the end of the day, the Men’s Solution Splitboard is great for anyone looking for a one-board quiver that will ride well no matter what the forecast throws at you. 

Specifications

Setback
2 cm
Taper
15 mm
Flex
7
Sizes
150, 157
Profile
Camber underfoot, rocker at the nose

Pros & Cons

Pros

  • Playful flex encourages fun
  • Timeless design
  • Versatile shape excels across conditions

Cons

  • Limited sizing
  • Union hooks at the nose and tail
Morgan Tilton

From first-season splitboarders to veterans who have earned turns for years, the Korua Shapes Transition Finder Splitboard ($849) is an excellent option for people who prioritize fun and flow. The Transition Finder can hold an edge and float like an actual powder board. It’s a unicorn across conditions. 

We tested this board in a myriad of conditions for a full season. We rode it in everything from perfect mid-winter powder to sketchy sun-cups at the end of long spring tours. The design, material and construction performs well and is fairly priced. With that said, we wish it was available in more sizes beyond the 150 and 157 currently on offer. 

When conditions are less than ideal — think a steep, firm, wind-affected drop in — this board’s substantial camber underfoot provides confidence-inspiring edge hold when you need it. The generous 264 mm waist width means there’s no fear of toe or heel drag in steep terrain. The slight volume shifted design provides ample surface area when things get super deep, too. 

The most significant change that Korua made from previous versions of the Transition Finder was to reduce the taper slightly – this gives the board a better feel in the skin track and makes riding switch a bit easier too. However, it still has 15 mm of taper, so it excels in powder. The wide nose and torsionally stiff tail provides a fantastic platform for creative backcountry riding in deep snow. 

As the season is coming to a close and your exits from big spring lines become less than ideal — mashed potatoes or sun cups — this board’s progressive, forgiving flex allows for easy navigation through obstacles. If, however, you want one of the lightest boards available to make those long spring days easier on the uphill, we suggest checking out the Stranda Descender Fjäderlätt Splitboard. 

But if you are looking for a board that excels in all conditions — stiff enough to charge and sufficient flex to pop off of anything — then take a hard look at the Transition Finder Splitboard. You’d be hard pressed to find a board that is this capable at a moderate price point. 

Specifications

Setback
2 cm
Taper
0 mm
Flex
5
Sizes
142, 145, 148, 151, 154
Shape
Directional
Profile
Directional rocker in the nose, camber underfoot, rockered tail

Pros & Cons

Pros

  • Fun-loving plank
  • Vibrant topsheet art
  • One of the largest size runs among women’s splitboards

Cons

  • Too forgiving for super steep, bulletproof drop-ins
Morgan Tilton

The ladies’ Jones Dream Weaver Splitboard ($850) is a playful all-around ride that’s less aggressive than other splitboards among our top picks, great for beginner and intermediate shredders, or a nice choice if you’re looking for a forgiving stick. This board incorporates the light, poppy Control Split Core: premium paulownia wood with half as much poplar, as stringers. The eye-catching, brightly colored mountain graphic on this season’s board, created by artist Annie Brace, is an added garnish we really enjoy. 

Well-rounded and with a directional shape and directional flex pattern, this board also has a directional hybrid camber-rocker profile. Between and beneath the feet is cambered, which transitions to slight rocker in the tail and exaggerated rocker in the nose. 

Among our favorite details include the Traction Tech 1.0 edges, a mildly wavy edge with three bumps that increase the contact points, which is incorporated on both the interior and exterior edges, adding bite on uneven snow while skinning uphill or riding down. 

We threaded this gal through tight glades, powdery slope sides, chunky crystals, sun cups, and spring-induce divots. On the softer side, the Dream Weaver Splitboard felt playful though it didn’t collapse when slicing through huge chunks. That pliability is noticeable on firm, steep high-alpine faces, and if too much force is applied, you could wash out, so it’s not our top pick for gripped terrain. Overall, the board moves smoothly edge to edge through moderate slopes and snowpack while being straightforward and gleeful to ride. 

Specifications

Setback
.5 cm
Taper
10 mm
Flex
8
Sizes
148, 152, 156, 159, 164
Profile
Directional camber, camber between the feet, more rocker in the nose than tail

Pros & Cons

Pros

  • Sustainably made
  • Stable at speed and through chunder

Cons

  • Heavy underfoot
  • Slow turn initiation
Morgan Tilton

Hats off to the unisex WNDR Alpine BelleTour ($999), a revolutionary new splitboard designed to have the least impact on the planet without compromising on performance. Since the brand’s inception in 2019, WNDR Alpine has redefined the snowsports industry by switching from petroleum-based materials to organic materials in the form of algae to build their skis and snowboards. 

Here, the BelleTour has a directional freeride shape designed for big radius, high speed turns with enough versatility for all conditions. A shovel nose, wide waist, and slight swallow tail give the board plenty of float in powder. Matched with a 7.8m radius sidecut the board remains snappy for quick turn initiation.

The Algal-Core and sidewalls provide unmatched damping and stability on the descent. The board does feel a bit heavy underfoot coming in at 3300 g or 7.2 pounds (156 cm), but the extra weight felt incredibly stable when powering through chunder or railing turns in variable conditions. 

Sustainable materials really set this splittie apart from other splitboards. First up is the Algal-Core, a composite core made from a mix of microalgae-derived polyurethane and domestically sourced aspen. The bio-based core offers superior dampening properties compared to solid wood core boards.

Next is the Algal-Wall sidewall, a cast polyurethane from microalgae oil which is poured as a liquid onto the outside of the core. The Algal-Wall not only uses sustainable materials but also increases impact strength and damping over traditional materials. The board also uses WNDR’s Spiral Plate insert packs or binding inserts made from reclaimed production waste that are shown to outperform in pullout strength testing over traditional wood inserts.

All these combine to a board that rides as good as the feeling that the materials used aren’t harming our planet. For those that want the white room to be a little more green, the Alpine BelleTour is a sustainable splitboard that provides unmatched stability and damping across all types of conditions in the backcountry. 

Specifications

Setback
2 cm
Taper
10 mm
Flex
9
Sizes
156, 158W, 159, 161W
Profile
Directional rocker

Pros & Cons

Pros

  • More playful than the Solution
  • Easier to initiate turns

Cons

  • Tapered nose can sink into deep powder
  • May be too stiff for some riders
Morgan Tilton

Let us introduce you to the younger, more playful brother of the Solution: The men’s Jones Stratos Splitboard ($1,000). While both boards feature a 3D Contour base, which creates 7 mm of spoon in both the nose and the tail, the Stratos is a more directional snowboard featuring a slight swallowtail with 10 mm of tapper. This shape helps the tail sink in powder, which in turn lifts the nose, giving more float and a quicker turn initiation. Jones also shaped a more directional nose to build out a more directional shape. 

Helping to put the directional shapes into effect Jones included a directional flex pattern to match. This means the nose, tail, and center are slightly different flexes, which is unique to the Stratos over the Solution, which has a continuous mid-to-stiff flex. We found this to be one of the stiffest boards we tested with most of the flex in the nose and slight flex in the tail. This was really noticeable in heavy spring slush but also helped with float in powder.  

The Solution and the Stratos are siblings sharing the exact same set of features we’ve known to love from Jones. The Stratos does feature the Traction Tech 3.0, giving it a better edge on the skin track or icy descents. We found the Stratos to be a bit stiffer, more playful, and easier to make quick turns whereas the Solution liked long and fast turns the best.

On one particularly deep day of testing, we had trouble keeping the more tapered nose above powder especially as it got lower angle but generally this is where the Stratos excelled over the Solution. 

Indeed, the Stratos Splitboard is still a highly versatile splitboard for a range of conditions which aims to fill the gap of playfulness the Solution lacks.

Specifications

Set back
0 cm
Taper
2 mm
Flex
4
Sizes
143, 148, 153
Shape
Directional swallowtail
Profile
Rocker nose to camber

Pros & Cons

Pros

  • Nothing flies down a powder field more gloriously
  • Unique, playful design

Cons

  • Not a top-choice all-mountain tool for variable, steep, aggressive lines
  • Freestylers would likely prefer a more classic shape
  • On the pricier side
Morgan Tilton

A powder queen made for the ladies, the Weston Revel Splitboard ($949) takes a cue from the men’s Japow: Nothing competes with the wide-spooned nose, rockered tip, tapered profile, and classic fishtail when it comes to surfing white mountain waves. This also isn’t a graphics swap. Based on feedback from female riders, compared to the brother Japow, the design’s swallowtail is shorter, the nose is a bit more blunted, the waist width is narrower, and the core slightly differs.

That carved-out tail leads to greater speed and less energy: All you need is to lean back. The board’s core features durable 71% poplar, 26% paulownia, and carbon stringers and an insert in the tail, plus 3% bamboo under the inserts for binding retention, leading to a lighter weight yet poppy ride. The sintered 4001 base is durable. For longevity, the sustainable, strong nylon topsheet is made from castor bean oil. 

These days, Weston’s splitboards feature tip holes and tail notches to pull on the new brand-specific mohair-mix climbing skins with ease. On the Weston Approach Splitboard Skins ($235), the small reinforced holes are placed at the top-center of each ski nose and the notches are likewise centered, so the skins are straight and transferable between each ski versus being designated to a left or right side.

At the top of the skin, the metal, smooth L-shaped hook easily slides into the hole: a Pomoca design. The proprietary clips on the ends are a bit clunky and don’t fit seamlessly with the Revel’s tail notches, due to the deep arch of the swallowtail. But they work. The glue is top-notch, sticky yet clean (again — Pomoca!) One thing to keep in mind is that this skin design is not universal and would not be compatible with other brand’s splitboards. 

After plenty of laps, we found that uphilling goes fine with this board. While descending variable snow, we were surprised that the Revel Splitboard edged well through very crunchy, narrow hallways and into sun-baked curbs lining the aisle. Ollieing a fishtail feels silly, and there seemed to be minimal chatter due to less material overall. Nonetheless, this board is the most fun in powder, where it absolutely flies. It’s fast! It’s oh-so fun.

Specifications

Setback
2 cm
Taper
9 mm
Flex
9
Sizes
158, 162, 166W
Profile
Camber past the feet, more rocker in the nose than tail

Pros & Cons

Pros

  • Stability at speeds
  • Lightweight

Cons

  • Overly damp
  • Fights to float in low angle pow
Morgan Tilton

The Weston Ridgeline Splitboard ($950) provides a stiff and hard-charging attitude in a pleasantly lightweight package. The weight is especially noticeable on the skin track where this board makes for easy steps and snappy kick turns. A very small amount of aluminum in the core and a set of parallel carbon stringers running tip to tail make this board feel stiff and damp under foot, combined with a traditional camber profile and directional shape create an exceptional level of stability and confidence at high speeds and in variable snow conditions.

That stiffness and damp feel do make this board demanding to ride. It is not the friendliest board to ride when the terrain mellows out but the snow is still deep. In low-angle pow, the board tends to dive under the snow, and you’ll find you have to work hard to make it float. This was the stiffest board in our test, receiving a flex rating of nine on our scale compared to a manufacturer-assigned rating of eight.

We tested this board using the proprietary Weston branded skins, manufactured by Pomoca. These skins are designed with tip and tail clips specific to Weston snowboards. The tip attachment is easy and seamless, the skin clip simply attaches to the board through a hole at the tip of the board.

We found the tail clip to be less user-friendly, and it was difficult to get the horizontal clip of the skins to mesh with the vertical tail notch in the board. This resulted in a poor connection between the board and the skin, causing them to come unclipped multiple times during our tests. It is also good to note that these skins will only work on a Weston board with tip holes and tail notches.

If you’re prioritizing big lines in demanding conditions the Ridgeline Splitboard won’t hold you back from getting the most out of your descents. It craves speed and responds with an amazing amount of stability. On the other hand, riders seeking better board feel, a more relaxed experience, or who plan to keep it safe in low angle terrain most days will want to check out some of the other boards on our list. 

Specifications

Setback
2.5 cm
Taper
7 mm
Flex
7
Sizes
156, 157W, 160, 161W, 165, 166W, 170
Profile
Flat between the feet, mellow rocker in the nose and tail

Pros & Cons

Pros

  • Under $1,000

Cons

  • Profile and flex feel mismatched
  • Lacks pop
Morgan Tilton

At just under a grand, the Venture Paragon Splitboard ($999) for men comes in as a rather average-priced option on the market. Pair the price of this board with its ability to handle variable terrain choices and snow, and it’s a good option for those looking to stay under the $1,000 mark. Unfortunately, unlike other boards in this test, it’s difficult to pin down what the Paragon excels at.

This board seems to handle most terrain OK but not great, failing to really present a wow factor for itself. The flat camber and directional shape do help with float in powder but it is coupled with a damper feel that prevents the board from being playful, resulting in a lifeless feel underfoot.

We gave this board a seven on our flex scale which might be overly too stiff to match the flat camper profile which is typically associated with boards of a more playful nature. This differs slightly from the six (of eleven) assigned to this board by Venture.

In the end, the board comes out as one that will suit the needs of an intermediate rider stepping into the backcountry for the first time. If you are unsure of what expectations you have for backcountry riding this board won’t hold you back. It does, however, seem to have a bit of an identity crisis, yes this board is capable of floating through pow and can certainly hold an edge through firm snow.

We couldn’t help wondering how much more fun this board could be if it was made a little softer to match to flat camber, or what if it was made with traditional camber to better match the flex?

Regardless, the Paragon Splitboard is still a good all-around board for the price, especially considering these whips are handmade at an awesome little factory in Silverton, Colo.

splitboarder standing at the top of a line with mountain backdrop
Most of our favorite splitboards can handle a range of conditions for all-season use; (photo/Eric Phillips)

Splitboards Comparison Chart

Scroll right to view all of the columns: Price, Setback, Flex, Sizes, Profile.

SplitboardsPriceSetbackFlexSizesProfile
 Never Summer Proto $1,1201.9 cm7157, 160, 164WCamber past the feet, more rocker in the nose than tail
Jones Women’s Solution
$1,0502 cm7146, 149, 152, 155Directional rocker in the nose, camber underfoot, rockered tail
Stranda Descender B.C.$8952 cm8158, 161, 162W, 166, 166WDirectional freeride, camber past the feet, rocker tip and tail
Arbor Veda$7802 cm6152, 156Camber that’s gradually reduced towards the tip and tail
Jones Men’s Solution $9802 cm8154, 158, 159W, 161, 162W, 164, 165W, 167, 169WDirectional rocker, camber between the feet, more rocker in the nose than tail
Stranda Women’s Descender $8952 cm8148, 152Low camber with minor rocker in the tip and tail 
Capita Navigator$1,0002.5 cm4147, 151, 155, 158, 161, 164Camber past the feet, rocker tip and tail
Weston Ridgeline $9502 cm9158, 162, 166WCamber past the feet, more rocker in the nose than tail
K2 Isolator $1,0501.9 cm8154, 158Volume shifted, directional
Stranda Descender Fjäderlätt $1,2452 cm8158, 161, 162W, 166, 166WDirectional freeride
Jones Dream Weaver $8502 cm5142, 145, 148, 151, 154Directional rocker in the nose, camber underfoot, rockered tail
Weston Revel $9490 cm4143, 148, 153Rocker nose to camber
WNDR Alpine BelleTour
$999.5cm8148, 152, 156, 159, 164Directional camber, camber between the feet, more rocker in the nose than tail
Venture Paragon $9992.5 cm7149, 153, 154, 158, 159, 163, 164, 168 Flat between the feet, mellow rocker in the nose and tail
Korua Shapes Transition Finder  $8492 cm7150, 153Camber underfoot, rocker at the nose
Jones Stratos $1,0002 cm9156, 158W, 159, 161WDirectional rocker
splitboarder holding board
A freeride or all-mountain splitboard can handle variable snow, powder, and ice fairly well; (photo/Eric Phillips)

How We Tested the Best Splitboards

Our crew of GearJunkie splitboard testers consists of several expert-level riders, all with a high level of backcountry experience.

Our Expert Testers

Tester Nick Catmur is AIARE 1 certified. He grew up a devoted skier but caved during the snowboarding craze of the late 90s. He fully converted to standing sideways in 1999. Crested Butte has been home since age one, and Catmur has 30-plus years of experience in the surrounding mountains. Catmur created his inaugural splitboard using a table saw. The board had self-epoxied side walls. He mounted resort bindings on top with the original Voile metal slider plates. He is pleased with today’s modern tech, which is far removed from the days of homemade rigs! 

Testing ladies’ goods, GearJunkie Senior Editor Morgan Tilton is AIARE 2 certified. Tilton grew up in Telluride, Colorado, and started backcountry skiing in Estes Park followed by moving to Crested Butte for the winter backcountry. She started as a skier but switched to snowboarding in 2005. She spends winters enjoying multiple forms of snowboarding, from spinning laps inbounds to sled-accessed backcountry missions. There’s a sprinkling of pow surfing, too. 

Also putting men’s splitties through the paces is local Crested Buttian Eric Phillips, GearJunkie tester and photographer. Phillips is a formerly certified Level II PSIA-AASI instructor and a big-mountain pow surfer when he’s not at the resort. He also enjoys slashing powder with his sled and taking tons of splitboard tours. Sean Galaway is a frequent splitboarder based in Mammoth Lakes, Calif.

Our Testing Grounds

Our riders conducted the majority of testing in the rugged Elk Mountains outside their hometown of Crested Butte, Colo. Test laps also went down in the nearby San Juan Mountains.

Our Testing Process

No matter how great a winter is, the backcountry is always full of variety. It’s easy to test splitboards across the full range of snow conditions typically experienced in a season. From bottomless powder days to hard-packed windboard — leaving you second-guessing why you didn’t go to the resort — and everything in between.

The all-mountain snowboard category dominates the splitboard market and our fleet of test boards reflects this. One exception is the ladies’ Weston Revel. Otherwise, you won’t find short, stubby, or swallowtail powder boards on this list. Instead, we focus on do-it-all splits from a wide range of brands and price points. The goal was to help you find the perfect board for all your backcountry outings.

We focus on assessing performance across a constellation of details including the durability, flex, profile, shape, width, length, edge to edge transfer, dampness, setback, taper, edges, topsheet, binding and skin compatibility, as well as the ease and hardiness of the tip and tail clips. We also consider the purpose and best rider for each board.

In addition to field tests, we examine the most sustainable, innovative, and legacy boards out there for our pool of selects.

a lineup of splitboards standing in the snow
Splitboards can be gender-specific or unisex in technical design, aesthetically via the topsheet, or both; (photo/Eric Phillips)

The Best Splitboards: A Buyer’s Guide

What Is a Splitboard?

“Those are some funny-lookin’ skis.” As a splitboarder, there is actually a chance you’ll hear someone say that. A splitboard is exactly what it sounds like: a snowboard that can split in half and become a pair of skis. 

Providing snowboarders with a ticket to ditch the resort, the skis of a splitboard are meant solely for uphill use. Split skis are not intended for downhill skiing. Though, that’s an important skill to learn for backcountry travel.

These setups utilize special bindings and a pair of skins, so you can use those splitboard skis to walk uphill. Once you reach the top, it’ll take you a few minutes to transition the skis back into a snowboard. That technical adaptability allows you to carve your way back down the slope. 

How to Choose a Splitboard

Like your resort board, you want to choose something that matches your style. Don’t go wild thinking you need to size up for all that pow. Be sure to consider the variable conditions you might encounter. Do you expect to always be in deep powder? Or, do you want a stable board that can handle stiffer, wind-affected snow or slushy spring conditions? 

Think about the type of board you ride on the resort. Avoid arbitrarily jumping to a more aggressive flex or bigger size because “it’s for the backcountry.” Stick with what you know and what makes you comfortable. 

Speaking of comfort, if you are thinking about getting into splitboarding, we recommend honing your skills at your local resort. You should consider yourself an advanced to expert rider. Meaning, you are very comfortable riding all types of terrain and snow conditions. The backcountry is not a place to learn how to ride. Humility is important here.

Check off the black diamond and double-black diamond runs at your home resort before heading out. Navigate tight trees, rocky slopes, ice, and deep powder in blizzards, cold temps, high humidity, and heat. Those factors change how gear performs and teach you physical and mental skills for the volatility of the backcountry.

Once you are ready to step into the backcountry, think about your expectations. Are you hoping to get out a few times a year for some safe low-angle pow? Or are you ditching the season pass to splitboard every chance you get regardless of snow conditions? You might be willing to invest more heavily the more you plan to step out of bounds.

Either way, thanks to the growing popularity of splitboarding, there’s more variety in the shapes and styles of than ever. The evolution makes it easier to find the right splitboard for your backcountry expectations and skill level. 

splitboarder hitting a cliff drop
Tester and reviewer Nick Catmur taking advantage of the deep days with cliff drops; (photo/Eric Phillips)

Splitboard vs. Solid Snowboard

When you see a splitboard, you’ll instantly notice some differences between it and a normal or solid snowboard. There’s a giant cut down the middle where the wood separates to form skis. 

Along this cut, you’ll notice a straight metal edge on the inside. There are two clips: one at the tip and another set at the tail. The splitboard also has two sets of hooks (four total) that are situated in the center between the nose and tail.

The clips and hooks keep the board together when in snowboard mode. A variety are out there, but we don’t recommend letting them get in the way of your purchase decision. 

Similar to solid boards, splitboards come with metal inserts that accommodate various locations for mounting bindings. However, splitboards have extra inserts in the middle of the board between your feet. This is where you’ll mount brackets that accommodate your bindings when the board is split into skis for uphill travel. 

Like a solid board, the hardware for mounting bindings can be easily removed and replaced. You only need a #3 Phillips head screwdriver. This allows for easy at-home stance adjustments so you can always dial in the perfect setup. 

splitboarder carving a steep slope in deep snow
Most of our favorite splitboards are more cambered than rockered in choice hybrid profiles; (photo/Eric Phillips)

Shape & Profile: Splitboards

The shape of a splitboard is the outline or silhouette of the board. If you hold a model in front of you, with the top sheet head on, the shape is pretty clear.

That profile is harder to see with the naked eye. Swivel the board, so you’re looking at the counter of the base and along the metal edge. Together, the shape and profile of the splitboard greatly influence how it rides.

The intended use of splitboards in variable, natural snowpack influences their shapes and profiles. That’s why the majority of splits have directional shapes and camber-dominant hybrid profiles. Those two details define the all-mountain riding category. We have yet to encounter any backcountry terrain parks or rails at the top of a climb. That’s probably why it’s hard to find full rocker, true twin, or asymmetrical splitboards. 

Hybrid Profiles

Hybrid profiles were the most common in our fleet of tested boards. Those profiles are dominated by camber with smaller amounts of rocker in the tip and tail. There’s good reason for this profile combo.

The camber helps maximize skin contact with the snow on the ups. Camber also helps riders maintain edge control in steeper and rougher terrain on the downs. The tip and tail rocker help riders float through powder with less effort. For a better, all-around ride we recommend this blend of camber over a full-rocker profile when buying a splitboard.

splitboarder standing holding board
Our team tested the Capita Navigator Splitboard for men and found gold stars with the design; (photo/Eric Phillips)

Splitboard Shapes: All-Mountain vs. Powder

Splitboard shapes are primarily geared toward all-mountain and powder riding, much like splitboard profiles. Meaning, directional-shaped boards dominate the market. However, within this design, there are plenty of subtleties that can change how a board rides. Two of the biggest ones to consider when it comes to the shape of a board are setback and taper.

Setback

The setback of a splitboard refers to how far the binding inserts are positioned away from the center between the tip and tail. The higher the setback number, the longer the nose of the board resulting in an even more directional feel. The higher the setback, the more awkward a board can be to ride switch, which is sometimes requisite in terrain.

Taper

Taper refers to how much narrower the tail of the board is than the nose. Tapered boards make it easier to sink your tail into the snow and float that wider nose through the powder.

Similar to setback, a board with more taper feels more directional than a board with less. If you prefer a more centered stance or freestyle flair, look for a board with minimal setback and taper.

For an in-depth dive into snowboard shapes and profiles, check out our Best All-Mountain Snowboards buyer’s guide.

splitboarder hitting jump in trees
Some splitboards are built for powder; Most boards can handle when tester Eric Phillips snags hits; (photo/Morgan Tilton)

Types of Splitboards

The variety in types of splitboards isn’t as broad as it is for solid boards. Most splitboards are primarily geared toward riding powder and in variable snow conditions. Manicured groomers, park jumps, and rails aren’t part of backcountry riding.

Therefore, the types of splitboards typically fall into one of two categories: daily driver or powder-specific. We tack on a third “lightweight” category, as well, since some brands strive to drive down weight.   

  • Daily driver: Labeled as all mountain, all terrain, freeride — these designs handle a range of conditions and have moderate setback
  • Powder specific: Built for float with unique shapes, wide nose, swallow tail
  • Lightweight: Reduced materials and weight, less playful and stout, saves energy on bigger missions
splitboard set in snow with mountain backdrop
The WNDR Alpine BelleTour is one of the most sustainable designs out there, and it’s fun; (photo/Eric Phillips)

When considering splitboard categories, ask yourself: “What am I going to use this splitboard for?”

If this splitboard will be your only, or the setup that you ride most days, stick with a daily driver.

Brands don’t typically label boards this way. When you’re scrolling their sites, look for the terms: all mountain, all terrain, or freeride. These designs often carry the traditional look of a snowboard. They have a moderate setback stance. They’re good at handling any conditions that the backcountry throws at you.

The majority of splitboards in this guide fall into this category. The exception is the ladies’ Weston Revel Splitboard, which offers up a swallowtail.

Powder-Specific Splitboards

Powder-specific boards are exactly that. You might be buying one of these if you already own a daily driver. Or, you might want a powder-specific board if you strictly prioritize going into the backcountry to ride bottomless pow.

A lot of powder splitboards have a unique shape. Their characteristics can include a big wide nose. They often have a swallow tail, or a similar cut out, at the tail end of the silhouette. 

Lightweight Splitboards

The last category for splitboards is the lightweight category. This might be a camp to consider if you know your splitboard missions will include long approaches and big climbs.

Lightweight boards will be very similar in their look and style to daily drivers. The caveat is that lightweight boards have reduced materials and more than likely, lots of carbon. We’ve found that the reduction in materials and added carbon can make these boards less playful than daily drivers. Carbon will increase the price tag, too. For some designs, durability can go down.

If you’re into counting grams, be sure to check out splitboards in this category. 

female splitboarder holding up board
Swallowtail designs are excellent choices for float in powder; (photo/Eric Phillips)

Length

When shopping for a splitboard, try to avoid the arbitrary assumption that you need to size up. It’s a pitfall to think that because it’s the backcountry, you need a bigger, more aggressive board. Splitboards are designed to flourish in mixed conditions and to help you float in powder. You won’t need extra length for that. 

Length should primarily be determined by three factors: rider weight, skill level, and expectations. Rider weight should be your starting point, and we suggest sticking within the board’s manufacturer-recommended weight range. That weight range can be rather large.

Less aggressive riders or riders looking for casual experiences should pick a length in the middle-to-lower half of the weight chart. More aggressive riders and those stepping into bigger terrain, don’t be afraid to select the longest recommended length or beyond. 

Longer boards can quickly become too much to handle. Meaning, it can be difficult to navigate gladed terrain or initiate turns in consequential areas. Stick with a size that makes you comfortable. Don’t deviate too much from what you would typically ride at the resort.

splitboarder making s-turns in snow
Powder days are great when they happen but most days are full of variable snowpack in the backcountry; (photo/Eric Phillips)

Width

This is where it pays to be a splitboarder. We have way fewer options regarding width than our brethren in the ski world, making our decisions easier. Every splitboard out there is pretty wide compared to skis. You don’t need different widths for different depths of snow. You don’t have the option to go skinnier to save weight.

In our test fleet of boards, the waist width never varied by more than 1 cm between boards. When comparing board waists, typically the width increases by approximately 1 cm, if the board is a “wide” iteration. For example, the Jones Solution Splitboard in a 161 length has a width of 25.2 cm. The 162 version has a width of 26.3 cm.  

Our same recommendation for length carries over to width — stick with what you know. For splitboarding, you should have enough snowboard experience to know if your boot size requires a wide board. If it does, stick with that rule. If you don’t typically ride a wide board we don’t recommend getting one as your backcountry rig either. 

rider holding up splitboard
Our team enjoyed the volume-shifted K2 Isolator Unisex Splitboard, which can be ridden in shorter sizes; (photo/Eric Phillips)

Materials & Weight

Materials used in splitboard construction don’t vary that much from what is seen in traditional solid boards. However, the layup and the amount of each material typically differ between solids and splits. The reason for this is to accomplish two main goals. First, keep the boards lighter in weight. Second, to compensate for the added torsional flex that’s created by the cut running down the board’s gut.

The core materials used in splitboards tend to prioritize lighter-weight woods such as aspen, paulownia, beech, or bamboo. These woods will often dominate the majority of the board’s core. To achieve better pop or to increase stiffness and dampness, brands employ dense wood stringers down the board’s length. A couple of types are ash or poplar.

Other boards use carbon fiber stringers to achieve an even stiffer flex and damper feel. Carbon is a great way to add dampness while keeping down weight. A good example of this is the Weston Ridgeline Splitboard, which weighs 2,740 g. That’s 640 g less than the non-carbon version of this same splitboard.

Speaking of weight, splitboards are not going to be the lightest setup on any given skin track. They are lighter than they used to be. But the purpose of a splitboard demands a certain width that can only be reduced so far. Be conscious of the board’s weight. But don’t be driven to the wrong board for your riding style for the sake of a few ounces. For instance, the Never Summer Proto felt the heaviest underfoot but had the best downhill performance of the lot. 

splitboard sitting in rack on snowmobile
The length of the splitboard is the measurement from the tip to the tail; (photo/Eric Phillips)

Flex & Dampness

Flexibility and dampness often go hand in hand. The two design details are primarily determined by the materials and greatly impact the way a board performs.

There are two types of flex when talking about splitboards. Longitudinal flex, meaning tip to tail, and torsional, meaning heel to toe. Dampness refers to the board’s ability to absorb vibrations, or chatter, which is created as you speed up over snow. 

Let’s be real for a second. A splitboard is essentially two skis clipped together, which lends to a large amount of torsional flex. Manufacturers attempt different methods of construction to compensate for this and have done a good job in doing so. But splitboards inherently struggle to perform like solid boards. 

splitboarder descending on steep slope
The snowboard’s setback helps riders preserve energy if they need to balance the board by leaning back; (photo/Eric Phillips)

Flex Rating

Throughout testing, we focused on the longitudinal flex of each board. We assigned a flex rating from 1 to 10 to each model. The goal is to give you a better idea of how these boards compare to one another. The flex ratings assigned to boards by the company can be a good starting point. But those in-house ratings can be a bit arbitrary when you try to compare those numbers across different brands.

For this test, a 1 represents a board that flexes too much. Basically, it can’t support any amount of weight applied to the tip or tail. A 10 represents that doesn’t flex under any weight from the rider, think 2 x 4.

In our test, we gave the Weston Ridgeline Splitboard a nine, the highest rating of any board. It wasn’t impossible to flex but it was very reluctant to, making floating in powder a challenge. The Never Summer Proto Splitboard and Venture Paragon Splitboard were rated at seven: The sweet spot. They had enough flex to be fun without being too soft to not hold an edge.

The softest board in our test was the Capita Navigator Splitboard with a rating of four. This board was very easy to lean back on for easy float. But if we applied a bit too much pressure, it would easily give out from underneath us.

Your preference for board flex and dampness should be determined by your expectations and skill level, similar to a board’s length. A softer flexing board will be more forgiving and easier to maneuver. A soft board like the Capita Navigator Splitboard can be an easier, more playful ride in low-angle pow.

splitboarder standing at top of line with board
The Never Summer Proto Splitboard is one of our top picks for the guys; (photo/Eric Phillips)

Dampness

Dampness is the ability of a board to absorb vibration as it moves across snow. This detail is especially noticeable at high speeds and in variable snowpack. A damp ride can reduce chatter. You might compare dampness to shocks on a car or suspension on a bike.

Stiffer, damper boards are typically coined as more aggressive, like the Weston Ridgeline Splitboard. They hold an edge better at higher speeds. They won’t fold easily when you have to apply pressure to the nose or tail of the board. There is a fine line to walk with dampness. Overly damp boards can feel dense and unresponsive under a rider’s feet. The result eliminates playfulness and makes it a struggle to float through powder or initiate turns on lower angle terrain.

splitboarder descending through deep snow
The 3D Contour Base on the Jones Women’s Solution, a spoon bevel on the nose and tail, rides powder or crust well; (photo/Eric Phillips)

Sidecut & Sidecut Radius

Sidecut refers to the arc shape you see on the long edge of a board. Different boards have different depths and curvatures along this edge which change how the board performs when turning. Sidecut radius describes how this curvature is measured. This can be difficult to picture. But imagine if you extended the curved edge of your board until it made a giant circle. The sidecut radius is the measurement of half the width of this circle. 

OK, so what does this mean for how the board rides? A shallower sidecut or bigger radius allows the board to track longer, more drawn out turns. A deeper sidecut or shorter radius allows the board to initiate quick snappy turns. But the shorter radius won’t allow for those long arcing turns. It typically takes more effort or input from the rider to initiate turns on a board with a shallower sidecut. 

A traditional radial sidecut is fairly common for splitboards given it works well on boards with traditional camber. However, be sure to pay attention to anything specific the manufacturer describes about their side cuts.

Some brands will blend multiple radii along a single edge as this helps accommodate different camber profiles and riding styles. Capita uses a parabolic shape along the edge of their Capita Navigator Splitboard. The parabolic design is a deep sidecut in the center that blends into a shallower sidecut toward the ends.

sliding clips on splitboard with woman in background
The hooks are placed on each split-ski and pairs are located on both sides of your bindings; (photo/Eric Phillips)

Parts of a Splitboard Setup

Tip & Tail Clips

These come standard on all splitboards and serve to keep the tip and tail together when going downhill. 

Hooks

These are found about a quarter of the way in from the tip and tail. The hooks are more vital in holding the board together in downhill mode than the tip and tail clip. As a result, the build is beefier. 

A handful of brands make different styles of clips. In our experience, there isn’t one brand that stands above the rest. The model of hook that comes standard on a board shouldn’t sway your purchase decision.

tail clip
Tail clip designs differ slightly from brand to brand and are often made by third-party manufacturers; (photo/Eric Phillips)

Splitboard Binding Pucks

Unlike solid boards, you won’t screw your bindings directly into the board. Instead, you mount pucks, that allow you to easily take your bindings on and off. The attachment is done via a simple spin, slide, or pin for uphill and downhill modes. A few brands include pucks with the board, like K2 and Burton. But more than likely, these come with the bindings you buy or need to be purchased separately.

locking tail clip
The premium Karakoram Tip-Lock tip clips have a streamlined lock that swivels shut for added security; (photo/Eric Phillips)

Touring Bracket

Mounted to the insert between your feet, the touring bracket is what accommodates your bindings for uphill travel. These are included with splitboard bindings.

splitboard standing next to snowmobile
If you splitboard without bindings, it’s called no-boarding or pow surfing — it’s technically a different sport; (photo/Eric Phillips)

Splitboard Bindings 

The focus of this guide is on the splitboards themselves. But we are compelled to give a little background on splitboard bindings. And yes, we recommend buying splitboard-specific bindings.  

Spark R&D

The tried and true and the binding that we run on our personal setups. Without doubt, we have found a benchmark of durability in Spark R&D splitboard bindings. One of us has used the same pair for 8 years. The only replacements have been screws that rattled out from whoops following long, wild snowmobile approaches.

Spark has been in the splitboard binding game for a long time, and that experience has led to incredible bindings. They are reliable, comfortable, sturdy, simple in design, and easy to use. The simple puck system is quick in transitions and rarely faces issues with ice build-up. Spark bindings are also the only ones on our list that come with dual-height heel risers, which is key. Note that Spark sells their binding pucks separately for $80. 

sliding a splitboard binding on
You’ll need to purchase splitboard bindings and the mounting hardware separate from the splitboard; (photo/Eric Phillips)

Karakoram 

Karakoram blasted into the splitboard scene with something radically different than what we were used to seeing from Spark R&D.

Some in our ranks have found that Karakoram bindings perform a hair better than Spark. But that performance comes at a cost to your wallet and patience.

Our biggest complaint with Karakoram bindings is the amount of time you’ll spend trying to de-ice them while transitioning. 

woman clipping into splitboard bindings
Splitboard bindings are extremely durable but be prepared with replacement hardware and parts in the backcountry; (photo/Eric Phillips)

Union

Union has been making outstanding snowboard bindings for years. It’s no surprise to see them recently making the step to the splitboard binding market.

Their foray into the market left us wanting more. The split bindings were more comfortable than anything else on the market. But the overall system wasn’t user-friendly, making transitions slow and frustrating.

They recently redesigned their board and binding interface with the release of the Charger Splitboard Binding. The result is a much cleaner, easier-to-use transition. That upgrade puts these bindings at a top three choice for us. 

splitboard bindings
Some splitboard binding designs slide onto and off of pucks, which you’ll need to buy separately; (photo/Eric Phillips)

Phantom 

We felt obliged to give a nod to Phantom and all you hard boot splitboarders out there.

For those who don’t know what hard booting is? It refers to splitboarders using a lighter-weight alpine touring ski boot instead of a snowboard boot. As a result, the binding setup differs, too. You need downhill-specific pieces, like the Dyno DH, that slide onto pucks. For the touring, you need tech toes or a bin binding to attach the ski boots to the skis.

While we don’t have experience with hard booting, if you’re going that route, look into Phantom’s lineup. The brand is dedicated to making products for hard booting.

skins being pulled off a base
Take care of your skin glue, and it’ll take care of you; (photo/Eric Phillips)

Skins

The biggest impact on uphill travel will be your skins. Skins have two distinct sides. One side has thousands of synthetic fibers that grip the snow when walking uphill. The other is the “glue” side and sticks to the bottom of your skis. 

The synthetic material of skins usually comes in a blend of two distinct materials: nylon and mohair. Nylon is typically a little bulkier, though the fiber has an advantage of providing better traction and grip on snow. Mohair is typically lighter weight and provides better forward glide. However, mohair comes at the cost of not having as much traction compared to nylon.

The last part of the skins are the tip and tail clips, which attach to the ends of your skis. The tail clip is often adjustable allowing the skins to accommodate different length boards. Due to the shape of splitboard skis, skins are right and left-specific. 

skins being put onto a base
Nose clips on the Jones Pre-cut Nomad PRO Splitboard Skins slide easily onto the corner of each ski; (photo/Eric Phillips)

Where to Buy Splitboard Skins

There are a lot of companies out there making skins. Some of the most popular are Black Diamond, Pomoca, Montana, G3, and BCA. You’ll also find that some of your favorite snowboard brands are selling skins with their logos on them. In those cases, the brand is licensed to put their logo on skins from one of the manufacturers.

For example, Pomona makes the Jones-branded skins. Burton-branded skins are made by G3. Stranda partners with Kohla. There are countless other examples of this.

To keep it simple, forget branding. If you are new to skinning, we highly recommend buying skins with a higher percentage of nylon. You will appreciate the increased traction. Nylon adds minute weight that’s easily overshadowed through fewer slips and falls on the skin track. 

Universal vs. Proprietary Skins

It is a good idea to buy skins after, or at the same time you buy your board. The adjustable tail clips mentioned above will only be able to accommodate a certain range of board lengths. Most brands offer skins in different length ranges. You need to know how long your board is before you buy skins. Buying your splitboard bundled with skins might be an option. Another aspect to look out for is if the board has a proprietary skin attachment design.

A good example of this is the Weston Ridgeline Carbon Split. This design’s “tip hole” and “tail notches” are designed for a specific style skin attachment.

This board will also accept a universal style tip and tail attachment. The rider can buy a skin that works with one board or stick with the universal option. But if a skin is tailored to a board design, usually that’s the most functional (or only) compatible choice.

If you purchase a swallowtail-style splitboard, you need to see if the company makes skins specifically for that board. Or take the board to a shop to buy a skin that will effectively attach to the board.

two splitboarders looking at mountain view
Carry a beacon, shovel, probe, navigation device, avalanche forecast, and know how to use ’em; (photo/Eric Phillips)

Backcountry Safety

This guide isn’t the place to give a lecture on the dangers of the backcountry. But it needs to be said. Please get educated on backcountry safety, avalanche hazards, and rescue equipment before you venture into the backcountry.

Before buying a splitboard, you will need the essential equipment of an avalanche beacon, shovel, and probe. Buying these three items is the easy part. They are worthless without an education in avalanche safety and rescue and the ability to think critically. 

We can’t emphasize enough how important it is to learn backcountry safety before making backcountry riding part of your winter routine. How you approach this is up to you. Some quality resources could be your friends who backcountry ski or your local avalanche center. In Colorado, we have the Colorado Avalanche Information Center (CAIC).

Books are another great research tool including Staying Alive in Avalanche Terrain by Bruce Temper. Reading incident reports is another useful learning tool. Familiarize yourself with terms associated with avalanche hazards and how snow science experts predict avalanche dangers.

After gaining a basic understanding we highly recommend looking into avalanche training and courses. In the United States, the industry standard for avalanche education is The American Institute for Avalanche Rescue and Education (AIARE). The resources tab on AIARE’s website is also a great tool to begin familiarizing yourself with avalanche education.

woman pulling off ski from ski of splitboard
Carry skin savers to protect the glue on your skins in your pack and to quickly access skins; (photo/Eric Phillips)

Splitboarding Tips: Uphill Travel or Skinning

Brace yourself. This is how splitboarders spend the majority of their days, so it is important. The key to going uphill is to pace yourself and maintain efficiency. Here are a few key tips for your uphill journey:

1. Slide, don’t step

You don’t need to take big steps as you move uphill. You’ll use far less energy by sliding your ski across the snow and keeping it close to the ground. 

two splitboarders skinning uphill through tight woods
A variety of skins exist with unique synthetic and natural blends and treatments for types of snow; (photo/Eric Phillips)

2. Know when to use your heel risers

Those bars that elevate your heel off the board can be lifesavers. They help keep your weight back to preserve energy with each slide. The key is to use them if you are on an incline and don’t use them in the flats. If your bindings come with dual-height heel risers, the taller one is for steeper skin tracks. Don’t be afraid to use it!

3. Keep your weight back

Skinning with your weight back can be counterintuitive. Keep your weight toward your heels. That way, the more pressure there will be in the center of the board. That weight distribution creates the best grip between your skins and the snow. This will limit the potential for slipping backward on the skin track.

two backcountry splitboarders skinning uphill through forest
Some skins are better for glide while others are grippier on steeper skin tracks; (photo/Eric Phillips)

4. Master the kick turn

This is difficult to explain on paper. If you’re new to skinning, find an experienced buddy and ask them to give you a demo.

The bottom line is that this term refers to how you navigate the switchbacks on a skin track. Many people approach them by making an arched or U-shaped turn. However, when you do this, you inevitably point your skis straight uphill for a step or two. This can quickly lead to slipping and falling. Instead, try to make a V shape with your skis when in a switchback. Master this move, and it will save you a lot of energy. 

two splitboarders on skin track
Ski with the right side of the splitboard on your left foot; The left side goes on the right foot; (photo/Eric Phillips)

Price & Value

To get a splitboard, don’t expect the same price range as a solid board. The construction of a splitboard takes more time and materials to make. The factory is essentially making two skis rather than one board. The resulting price is basically double what you might pay for a similarly built solid board.

Another reason for the higher cost of splitboards is the use of higher-end materials in their construction. The best example of this is the use of a sinter base material over an extruded base material. Sintered bases are far more durable and perform better than extruded bases. We didn’t have a single splitboard in our test with an extruded base. 

Budget

So at the end of the day, the baseline cost of a splitboard is nearly double the price of a solid for the resort. You don’t want these tools to fail in the middle of nowhere, in the heart of winter. Even our most economical selects are made with a durable construction, a seamless center edge, a gouge-resistant base, and sturdy clips.

Our budget picks are the guys’ Stranda Descender B.C. Splitboard ($895) and the gals’ Arbor Veda Splitboard ($780). The $800 range also includes the Stranda Women’s Descender Splitboard ($895). You’ll also see the ladies’ Jones Dream Weaver Splitboard ($850).

splitboarder descending on powdery slope with mountain backdrop
Most splitboards range from $750 to $1,300 in our book; (photo/Eric Phillips)

Mid-Tier

Bumping into the $900 zone, these choices include the men’s Jones Stratos Splitboard ($1,000) and WNDR Alpine BelleTour ($999).

The Weston Ridgeline Splitboard ($950) has an aggressive layup of carbon, making it a good choice for very aggressive riders. But the Ridgeline will not be fun to ride for the average splitboarder.

If you are hoping to stay under $1,000 none of these boards are going to let you down. The Descender B.C. was one of our favorites. For a powder-centric rider, our fishtail choice is the women’s Weston Revel Splitboard ($949). 

Premium

If you aren’t worried about keeping your splitboard purchase under $1,000, it will open up more buying options. Remember more expensive doesn’t always mean better, it all depends on how you ride. But in this zone, you’ll find the hardiest, lightest, most detailed designs out there. Generally, the profile becomes more complex and has a hybrid between camber and rocker.

The Capita Navigator Splitboard ($1,000) is a great option for an easygoing rider who prefers trees. And the K2 Isolator Unisex Splitboard ($1,050) is a unique wide, volume-shifted design that, for many riders, solves a drag problem while others love the width for float. There’s also the high-end Jones Women’s Solution and men’s Solution Splitboard ($1,050 each).

If you’re cutting grams, look no further than the lightweight, top-notch build of the Stranda Descender Fjäderlätt Splitboard ($1,245). Lastly, the Never Summer Proto Splitboard ($1,120) falls at a premium, too. The Proto was awarded our best overall splitboard.

Frequently Asked Questions

Can I ride my splitboard at the resort?

The easy answer to this is yes, you certainly can. However, when you start to dig into the performance of split boards versus solid boards you may want to reconsider. The vertical cut in the middle of a splitboard leads to a torsional flex pattern. That means they’re inherently softer than solid boards.

This flex pattern can lead to splitboards not feeling quite as sturdy on those hard-packed groomers associated with resort riding. This isn’t to say they can’t handle it. If you’re used to riding a solid board, it takes some time adjusting to the way a splitboard feels.

The bottom line is this comes down to preference and money. We understand that splitboards are expensive. If you can only afford one board and plan to predominantly ride the backcountry then go for it. If you spend most days at the resort with a small dose of backcountry, we recommend having both boards. Maybe look for a used splitboard to save yourself some money. 

man holding two splitboard skis
The splitboard’s tip and tail clips and hooks typically come included in the purchase; (photo/Eric Phillips)
Can I downhill ski on my splitboard skis?

No. Splitboard skis can handle short descents that you encounter on the skin track. But split skis are not designed for downhill skiing.

We are sorry, but these are not an awesome 2-in-1 tool for people who ski and snowboard. Splitboards are simply a means for walking uphill, so that you can snowboard back down. 

splitboarding skins on top of backpack
Ride downhill with your skins in your jacket to keep the glue from freezing on cold days; (photo/Eric Phillips)
What other equipment should I carry while splitboarding? 

Aside from the essential avalanche rescue and safety equipment, there are other items you should consider carrying in the backcountry. 

The right size ski backpack is essential to make sure you have enough room for all of your equipment. Be sure to look for a pack that can accommodate your poles when going downhill.

Poles are considered foreign objects to most snowboarders but essential for splitboarding. We recommend a pole that compacts to a small size, so it can be easily stored on the downhills. We recommend telescoping poles over folding poles, as they tend to have fewer issues with freezing up in cold weather. 

Extra layers and gloves are very important, going uphill tends to make you pretty warm and potentially sweaty. You will want more layers to put on when making your descent. Extra layers are critical for emergencies that lead to being out longer than expected, potentially after dark or overnight. An emergency overnight shelter or bivy sack is also important for this reason.

Smaller items to carry include spare parts for your bindings (screw, straps, buckles, etc). You should also carry water, food, sunglasses, a first aid kit. Always have a spare plastic wax scraper with you. These are handy when ice builds up on the base, bindings, and inside edges of your board.

woman pulling skin off splitboard ski
You’ll need a backcountry pack to carry all of your gear and necessities; (photo/Eric Phillips)
What is the difference between sidecountry and backcountry? 

From a practical and preparation standpoint, there is no difference. Sidecountry is the same as backcountry and you need all of the same equipment, knowledge, and preparation.  

In most conversations, the two terms are used to describe different riding experiences. Sidecountry or slack country refers to terrain that can be accessed through a boundary gate at a lift-served ski resort.

You might access sidecountry by using a chairlift, but the terrain is considered out-of-bounds. Meaning, that zone is not maintained by ski patrol, so the terrain is not avalanche mitigated. Riders should not go in the sidecountry without proper backcountry knowledge, equipment, and the avalanche forecast. 

The term backcountry is used to describe terrain not associated with or accessed from a ski resort. However, it would be great if it replaced the term sidecountry. Sidecountry tends to imply that it isn’t as risky as the backcountry, giving a false impression of safety.  

splitboarding in the backcountry
Riding pow-specific, swallow tail, or reverse camber/rockered splitboard is fun on certain days; (photo/Eric Phillips)
Do I need different boots for splitboarding?

Unlike the board and bindings, you do not need a different or special pair of boots to splitboard in. A note we will make, though, is that splitboarding will wear your boots out significantly faster than resort riding. 

The walking motion of splitboarding tends to break down boots at a faster rate, resulting in a softer flexing boot. Many riders just accept this fact and set aside a specific pair of boots for splitboarding. If you’re starting out, see how much you like splitboarding before diving into a second pair of boots. How often you go is another factor.

Certain brands in the industry have acknowledged the additional strain placed on boots by splitboarding and have designed splitboard-specific boots. Boots of this style usually come with a multi-zone lacing system, articulated cuff, and beefier outsole. In some instances, boots are designed to accommodate crampons better than others. Some designs have an uphill mode to provide calf relief and textile technology that helps retain heat.

These additional features come at a premium. A few worth mentioning include the ThirtyTwo Jones MTB, Vans Verse, Nitro Incline, Burton Tourist, and Salomon Trek. Don’t forget to check out our GearJunkie Snowboard Boots buyer’s guide to learn more.

a lineup of splitboards in snow with two lead testers
We continue to test splitboards for their durability and will update this guide with our findings; (photo/Eric Phillips)