The Best Rain Jackets for Women of 2025
Best Climbing Rain Jacket for Women
Black Diamond Women’s Fineline Stretch Rain Shell
- Waterproof Material: GORE-TEX Paclite 2L
- Waterproof Rating: 28,000 mm/24 hours
- Breathability Rating: 15,000 g/m²
- Pit Zips: Yes
- Fit: Relaxed
- Size: XS-4X
- Pockets: Three
- Weight: 11.7 oz.
Pros
- Hem-to-bicep side TorsoFlo zippers
- The most eco-friendly OR apparel piece, with no PFCs
- Very lightweight and packable
- Ample coverage
Cons
- Not very breathable under hard work
- Pricier than some like shells
- Waterproof Material: 100% recycled polyester 2.5L
- Waterproof Rating: 10,000 mm/24 hours
- Breathability Rating: 10,000 g/m²
- Pit Zips: No
- Fit: Boxy
- Size: XXS-4X
- Pockets: Three
- Weight: 16 oz.
Pros
- Budget friendly price
- Stylish retro design with fun color blocking
- Roomy cut for layering
- C0 DWR finish and recycled polyester face fabric
- Broad size range from XXS to 4X
Cons
- No pit zips
- On the heavier side
- Hood is only single adjust
- Waterproof Material: Patagonia H2No NetPlus 3L
- Waterproof Rating: 20,000 mm/24 hours
- Breathability Rating: Unpublished
- Pit Zips: Yes
- Fit: Regular
- Size: XXS-XXL
- Pockets: Three
- Weight: 12.6 oz.
Pros
- Stuffs into its own pocket
- Helmet compatible hood
- Made from eco-conscious recycled material
- Incredible all-day comfort
- Good breathability
Cons
- Limited bright color options
- Sizing runs small
- Chest pocket does not accommodate larger phones
- Waterproof Material: NanoPro 3L
- Waterproof Rating: 20,000 mm
- Breathability Rating: 20,000 g/m²
- Pit Zips: Yes
- Fit: Regular
- Pockets: Two
- Size: XS-XL
- Weight: 13 oz.
Pros
- An upgrade to a 3-layer shell for not much money
- Solid 20,000 g/m² breathability
- Good protection for the cost
- Built-in stretch doesn't limit mobility
Cons
- Not very packable
- Slightly heavier than regular Precip Eco shell
- Waterproof Material: H2No Performance 3L
- Waterproof Rating: 20,000 mm
- Breathability Rating: Unpublished
- Pit Zips: No
- Fit: Trim/active
- Size: XXS-XL
- Pockets: One
- Weight: 6.3 oz.
Pros
- Great just-in-case layer for rain and wind
- Lightweight
- Breathable
- Stuffs down small
- Sustainable design
Cons
- Won’t stand up to intense rain
- Small chest pocket
- Loud color options
- Waterproof Material: BD.dry 2.5L
- Waterproof Rating: 10,000 mm
- Breathability Rating: 10,000 g/m²
- Pit Zips: Yes
- Fit: Regular
- Size: XXS-XXL
- Pockets: Two
- Weight: 9.5 oz.
Pros
- Great amount of stretch
- Near to skin feel
- Lightweight
- Climbing-helmet-compatible hood
Cons
- Can produce a clammy feel when sweating
- Tight around the hips
Other Rain Jackets to Keep You Dry
- Waterproof Material: 3-layer proprietary membrane
- Waterproof Rating: 25,000 mm
- Breathability Rating: RET 6
- Pit Zips: Yes
- Fit: Fitted
- Size: XS-2XL
- Pockets: Four
- Weight: 15 oz.
Pros
- Silent
- Great hood coverage
- Very comfortable
- Higher than the majority of water ratings
- Excellent affordability
Cons
- On the heavy side at near 1 pound
- Not a well represented brand in the U.S.
- Waterproof Material: DryVent 2.5L
- Waterproof Rating: Unpublished
- Breathability Rating: Unpublished
- Pit Zips: Yes
- Fit: Regular
- Size: XS-3XL
- Pockets: Five
- Weight: 11.2 oz.
Pros
- Five total pockets offers up plenty of storage
- Affordable price
- Pretty lightweight
- Packable 70D fabric
Cons
- Bunches in the front
- Hood doesn’t stay in place
- Not a very breathable jacket
- Waterproof Material: HydroWall 2.5L
- Waterproof Rating: Unpublished
- Breathability Rating: Unpublished
- Pit Zips: Yes
- Fit: Regular
- Size: XS-3X
- Pockets: Two
- Weight: 14.5 oz.
Pros
- Fantastic among of stretch
- Soft collar and chin guard
- Extended pit zips
Cons
- New waterproof membrane is still relatively unproven
- Quick water absorption on face fabric due to stretch
- Waterproof Material: Hydrostatic polyester 3L
- Waterproof Rating: 20,000 mm
- Breathability Rating: 15,000 g/m²
- Pit Zips: No
- Fit: Relaxed
- Size: 6-18
- Pockets: Four
- Weight: 1 lb., 7.6 oz.
Pros
- Exceptional for heavy rains and strong winds
- Excellent sustainability
- Great value
- 2-way waterproof front zipper
Cons
- Quite heavy
- No pit zips

Women’s Rain Jacket Comparison Chart
Women’s Rain Jacket | Price | Waterproof Material | Waterproof Rating | Breathability Rating | Weight |
---|---|---|---|---|---|
Outdoor Research Aspire II GORE-TEX Rain Jacket | $225 | GORE-TEX Paclite 2L | 28,000 mm | 15,000 g/m² | 11.7 oz. |
Cotopaxi Cielo Rain Jacket | $145 | 100% recycled polyester 2.5L | 10,000 mm | 10,000 g/m² | 16 oz. |
Patagonia Granite Crest Jacket | $279 | Patagonia H2No NetPlus 3L | 20,000 mm | N/A | 12.6 oz. |
Marmot Precip Eco Pro Jacket | $160 | NanoPro 3L | 20,000 mm | 20,000 g/m² | 13 oz. |
FORLOH Women’s Airalite Rain Jacket | $399 | Airadigm Pulse Plasma 3L | 35,000 mm | 23,000 g/m² | 14.8 oz. |
Patagonia Storm Racer | $299 | H2No Performance 3L | 20,000 mm | N/A | 6.3 oz. |
Black Diamond Women’s Fineline Stretch Rain Shell | $180 | BD.dry 2.5L | 10,000 mm | 10,000 g/m² | 9.5 oz. |
Decathlon Quechua Women’s MH500 Jacket | $109 | 3-layer proprietary membrane | 25,000 mm | RET 6 | 15 oz. |
The North Face Women’s Alta Vista Jacket | $140 | DryVent 2.5L | N/A | N/A | 11.2 oz. |
REI Co-op Flash Stretch Rain Jacket | $169 | HydroWall 2.5L | N/A | N/A | 14.5 oz. |
Finisterre Stormbird Waterproof Jacket | $295 | Hydrostatic polyester 3L | 20,000 mm | 15,000 g/m² | 1 lb., 7.6 oz. |
How We Tested the Best Rain Jackets for Women

Our Expert Testers
Our Testing Process and Testing Ground
Buyer’s Guide: How to Choose a Rain Jacket

Fit and Length

Pockets

Waterproof Membranes

- GORE-TEX Pro: Designed for extreme weather and high-intensity activities, GORE-TEX Pro features a unique ePTFE membrane with microscopic pores that ensure exceptional waterproofness and breathability. It’s favored by outdoor enthusiasts and professionals for its durability and performance, and more often seen in rugged hardshell jackets for climbing or skiing.
- GORE-TEX Paclite & Paclite Plus: These membranes are widely used in hiking and backpacking rain jackets for their high waterproofing rating. Paclite jackets omit the textile backer and use a layer of polyurethane and carbon on the interior, making them highly packable. Paclite Plus enhances durability while maintaining exceptional waterproofing performance.
- GORE-TEX ePE: GORE-TEX’s newest membrane, this textile strips out pervasive PFCs from inside and out and uses an expanded polyethylene to hit the high-quality waterproofing ratings, at a slight breathability ding. Many mid-tier rain jackets are pivoting to using this style of GORE-TEX.
- eVent: Known for high breathability, eVent utilizes ePTFE membrane technology, allowing moisture vapor to escape while preventing water from entering. It maintains breathability even in wet conditions by removing the polyurethane layer that most GORE-TEX layers apply internally.
- Pertex Shield+: Achieving a balance between water resistance and breathability, Pertex Shield+ utilizes a polyurethane film membrane. However, jackets made with these membranes may occasionally experience perspiration buildup.
Fabric Layers
- 2-layer: Simplicity reigns. These waterproof fabrics utilize a waterproof membrane and an outer face fabric to shield against scuffs and scrapes. Often, an internal hanging liner will be used to create a stand-off between the skin and the jacket, which both improves airflow and wicks away moisture. The Paclite used in the Outdoor Research Aspire II jacket is an excellent example of a jacket that doesn’t use this lining, in order to save on weight and bulk.
- 2.5-layer: A thin protective lining is added to the inside of the waterproof membrane, often laminated, screen printed, or sprayed on. This design, found in jackets like Black Diamond Fineline Stretch and REI Co-op Flash Stretch, enhances longevity and breathability by minimizing body oils and dirt that can clog membrane pores. However, they may feel clammy in prolonged rain and lack the moisture-wicking properties of three-layer jackets.
- 3-layer: The pinnacle of rain jacket performance lies in 3-layer constructions, featuring a third wicking textile inside the membrane. While these jackets excel in moisture management, they typically come at a higher price point. We have a handful on our list that offer 3-layer construction, including the Patagonia Granite Crest Rain, Storm Racer, and the FORLOH Airalite Jacket.
Durable Water Repellent Finish (DWR)

Waterproofness

- 5,000 mm: Begins technical rain outerwear for outdoor adventures.
- 5,000-10,000 mm: Waterproof under light rain or snow without pressure.
- 10,000-15,000 mm: Waterproof under most conditions except pressure.
- 15,000-20,000 mm: Waterproof under heavy rain and snow.
- Over 20,000 mm: Waterproof under heavy rain, snow, and pressure.
Breathability

Taped Seams and Zippers

Weight and Packability

Hoods

Sustainability

Durability and Longevity

Price & Value
Budget
Mid-Tier
Premium
Frequently Asked Questions
Rain jackets should fit comfortably, allowing for movement and layering underneath. Ensure the length provides ample coverage, sleeves cover your wrists, and the hood fits well, and shoulder seams should align with your shoulders. We do suggest trying it on before purchasing as some jackets can run small or large.
Your rain jacket may become damp inside due to factors like condensation, reduced breathability, damage, or improper sizing. To prevent this, ensure your jacket is clean, consider applying a DWR treatment if necessary, wear moisture-wicking layers, and regularly check for damage.
Water-resistant jackets repel water to some extent but are not fully waterproof. They can withstand light rain but may not keep you dry in heavy downpours. Waterproof jackets, on the other hand, are designed to keep you dry even in heavy rain or wet conditions, offering superior protection against moisture.
When layering with a rain jacket, begin with a moisture-wicking base layer to manage sweat and keep your skin dry. This could be a lightweight, breathable top made from materials like merino wool or synthetic fabrics.
Depending on the weather and your activity level, you may add an insulating midlayer for warmth like a fleece, down, or synthetic insulating midlayer. And depending on conditions you may opt for additional accessories like gloves and beanie for added warmth.
No, waterproof jackets do not stay waterproof forever. Over time, the waterproofing capabilities of a jacket can diminish due to various factors such as wear and tear, exposure to environmental elements, and the breakdown of waterproofing treatments like DWR (Durable Water Repellent) coatings.
Continuous use, abrasion, washing, and exposure to dirt, oils, and UV radiation can all contribute to the deterioration of a jacket’s waterproofing properties. Therefore, it’s essential to maintain and care for your waterproof jacket by periodically reapplying waterproofing treatments, cleaning it according to the manufacturer’s instructions, and inspecting it for signs of wear or damage.
Wetting out occurs when the outer fabric of a rain jacket becomes saturated with water, compromising the effectiveness of the waterproof membrane. This can result from the degradation of the DWR (durable water repellent) finish or external pressure, such as a heavy backpack, forcing moisture into the fabric. Additionally, an insufficient waterproofing rating can contribute to water seepage, particularly if a jacket intended for light rain encounters prolonged heavy precipitation.
To mitigate wetting out, it is advisable to choose a rain jacket with a high waterproof rating. Regularly washing and reapplying waterproofing treatments can also help maintain its effectiveness.

The Best Rain Jackets of 2025
Whether you’re splashing about town or trekking through a monsoon, these are the best rain jackets of 2025.

The Best Hardshell Jackets of 2025
After months of testing in the harshest of conditions, these are the best hardshell jackets to brave the alpine with in 2025.