Bicycle hubs are among the more complex components of cycling.
Hubs are found right smack in the middle of wheels and have a lot of responsibilities, particularly in the rear wheel.
Hubs hold wheels together by connecting to the rim through spokes. They also include bearings that allow wheels to spin around an axle and serve as the mounting point for cassettes and disc brakes. It’s a lot to pack into such a little package, especially considering the immense force riders thrust upon them.
Over time, bicycle hub standards, measurements, and features have changed to align with new cycling technology.
We’ll go through some of the latest hub standards and discuss the role of each.
Hub Standards: The Basics
About 15 years ago, hub standards were pretty simple. Back then, pretty much all bikes used small-diameter, quick-release skewers running through their hubs. They consistently measured 100 mm wide in the front and 130 mm in the back for road bikes and 100 x 135 mm for mountain bikes.
Things got murky when the larger diameter and stiffer thru-axle arrived on the scene. Thru-axles sparked a change for mountain bikes to a “standard” 15 x 100 mm axle up front with a 12 x 142 mm in the rear.
Most bikes of the time also had rim brakes, so hubs didn’t have to worry about mounts for brake rotors on the rear. But that, too, was changing.
Boost and Super Boost
According to Boyd Cycling, thru-axle proliferation came just as disc brakes began to rise, leading to changes in the mountain bike, cyclocross, and even road arenas.
“For cyclocross, most bikes started off as quick release and then very rapidly moved to thru-axle. This is where the fun began. At first, CX thru-axle was also 15 x 100 mm front and 12 x 142 mm thru-axle rear (same as the MTB ‘standard’),” according to Boyd.
As this was going on, according to Boyd, mountain bikes started to see an increase in 29er wheels that riders could put through more punishment.
“To combat this, there was an introduction of ‘Boost’ spacing, which places the flanges wider to make for a stronger wheel,” Boyd said. Wider hub flange spacing lends more lateral stiffness to wheels, which becomes more critical as the wheel diameter increases due to longer spoke lengths.
Boost spacing brought the width of the hub to 110 mm up front and 148 mm out back.
Meanwhile, disc brakes landing on more road bikes led to the front axle growing to a 12 mm thru-axle to help mitigate braking loads directly on the hub. Most modern disc-brake road bikes still use a 12 x 100 mm thru-axle up front and a 12 x 142 mm in the back.
“Most road, CX, and gravel bikes come with 12 x 100 mm thru-axle front and 12 x 142 mm thru-axle rear,” Boyd said. “Most mountain bikes come with 15 x 110 mm thru-axle front and 12 x 148 mm thru-axle rear.”
However, in the last few years, manufacturers have upped the ante further with Super Boost spacing, increasing the axle to 12 x 157 mm. Boost spacing (12 x 148) is still the current mountain bike standard, but many companies are eyeing Super Boost.
According to Nobl Wheels, the flanges are even further apart in Super Boost spacing, so the wheels are more robust.
Freehub Bodies (Drivers)
Engagement Systems
